CraftInsignia sintered-stone cabinets and furniture

Sintered-stone furniture and bespoke cabinet photographs

Explore photographs and view physical samples at the Kwun Tong showroom.

Sintered-stone furniture and interior surfaces

A durable, low-maintenance surface with stone-like patterns.

CraftInsignia offers bespoke sintered-stone furniture. Cabinets and furniture are made in Our workshop and can be viewed at our Showroom at 165 Hoi Bun Road, Kwun Tong. Marble, concrete and plain finishes suit kitchens, living and dining rooms and cabinet fronts, with easier care than natural marble.

Hard but brittle, sintered stone requires specialist cutting, edging and installation. Explore properties, limitations, thicknesses, care and actual photographs to decide whether it suits your flat. For joinery’s role in renovation, see Bespoke joinery and furniture for details.

Range
Sintered-stone furniture
workshop
Our workshop
Showroom
2/F–4/F, 165 Hoi Bun Road, Kwun Tong

What is sintered stone?

A manufactured mineral surface, distinct from quarried stone and resin-bound composite.

Quartz, feldspar, clay and other minerals are ground, pressed under high pressure and fired at around 1,200°C or above. Similar in process to ceramic tile, sintered stone is dense and available as large slabs.

Heat and pressure create a dense, low-porosity surface that absorbs little water and resists staining. The resin-free composition gives it different heat resistance from quartz composites and solid surfaces.

Finishes and patterns

Marble veining, concrete, metallic and plain colours are available in gloss or matt finishes. Sintered stone offers a stone-like appearance with less staining risk than natural marble.

Advantages and limitations of sintered stone

Consider both benefits and limitations before selecting a surface.

Advantages

  • Low water absorption: Low water absorption helps resist stains and mould in kitchens and bathrooms.
  • Heat resistance: High-temperature mineral sintering provides better heat resistance than resin-bound quartz and solid surface.
  • Hard surface: A hard surface resists ordinary scratching and abrasion.
  • Stain resistance and cleaning: Oil and sauces seldom penetrate; routine wiping is usually sufficient.
  • Pattern options: A variety of finishes suit different interior styles.
  • Large slabs: Fewer joints provide a more continuous surface.

Limitations

  • Hard but brittle: Impacts can chip corners and edges, particularly sharp ones.
  • Specialist fabrication: Cutting, drilling and finishing require suitable tools and experienced fabricators.
  • Visible joints: Unlike solid surface, the slabs cannot be joined invisibly.
  • Delivery constraints: Lifts and stairs restrict slab sizes, and large panels can break in transit.
  • Adequate support: Thin sheets need backing; worktops and tables need a suitable supporting structure.
  • Higher cost: Generally more expensive than solid surface.

Many problems arise during fabrication and installation. Our workshop coordinates design, cutting and installation. See Our workshop。

Comparing sintered stone, quartz, solid surface and marble

. General comparison of four common surfaces.

Comparison Sintered stone Engineered quartz Solid surface Natural marble
Composition Mineral powder sintered at high temperature Quartz crystals pressed with resin Resin and mineral powder Quarried natural stone
Heat resistance Good Limited; use a trivet Lower; high heat may deform or discolour it Localised heat can cause discolouration or cracking
Scratch resistance Hard surface Hard surface Softer and more easily scratched Varies by stone
Stain resistance Low absorption and good stain resistance Strong resistance to penetration Moderate; remove spills promptly More susceptible to staining
Joints Visible Visible Can be seamlessly joined Visible
Repair after damage Small chips may be repaired; large cracks require replacement Difficult to repair Can be sanded and polished Can be refinished and polished
Fabrication difficulty High Relatively high Low; readily shaped Moderate

General characteristics vary by product and brand. Consult samples and supplier specifications.

Applications in the home

Common uses in Hong Kong homes, from cabinets to walls.

Application Benefits Considerations
Cabinet doors and finishes Stone texture, scratch resistance and easy cleaning Thin slabs require backing; allow for door weight when selecting hinges
Dining tables Wear and heat resistance for daily meals Round or finish exposed edges and support larger tops
Kitchen worktops Heat and stain resistance Hob and sink cut-outs concentrate stress; check thickness and support
Kitchen walls Few joints and easily cleaned grease A flat substrate and secure adhesion are important
TV feature walls Large slabs give visual continuity Assess panel weight and delivery route before installation
Bathroom walls Low absorption and resistance to mould Complete the underlying waterproofing

Our range focuses on cabinets and furniture. For kitchen and bathroom projects, see Kitchen renovation and Bathroom renovation. For complete renovations, see Whole-home renovation for the scope of work.

Thickness and uses

Match thickness to use and support.

Thickness Features Typical uses
3mm Very thin and light, limited load capacity, needs a particularly flat substrate Cabinet doors and surface finishes
6mm Lightweight; requires reinforcement or backing Cabinet fronts, walls and cladding
9–12 mm Moderate thickness and strength; backing is still needed Wall panels, sideboard tops and dining tables
15–20 mm Higher strength Kitchen worktops

Typical market thicknesses and uses, rather than CraftInsignia product specifications. Confirm the appropriate thickness for the application and support when ordering.

Cleaning and maintenance

Easy care still requires a few precautions.

Daily cleaning

  • Use a soft cloth: Wipe with water or neutral detergent on a damp cloth, then dry.
  • Remove spills promptly: Wipe soy sauce, coffee and wine quickly, especially at joints.
  • No waxing needed: Wax cannot penetrate the low-absorption surface and may leave a sticky film.

Practices to avoid

  • Avoid steel wool and abrasives: Repeated use may dull the surface.
  • Avoid strong acids and alkalis: Heavy-duty descalers and toilet cleaners can damage the finish.
  • Use a chopping board: Cutting directly can blunt blades; repeated sharp impacts may damage the slab.
  • Place hot cookware on a trivet: Sudden temperature changes can cause microcracks despite heat resistance.
  • Protect edges from heavy impacts: Corners and edges are most vulnerable to chipping.

Periodic checks

Check worktop seams and edges. Repair cracked or missing filler promptly to prevent water reaching the substrate. A specialist can repair minor chips; a large crack may require replacing the affected section.

Checklist before ordering

Cut slabs are difficult to alter. Confirm each item before fabrication.

  • Use and location: Cabinet doors, worktops, tables and walls require different thicknesses and support.
  • Thickness and backing: Specify slab thickness, backing board or supporting frame.
  • Pattern and finish: Choose gloss or matt and confirm grain direction on a physical sample.
  • Edge treatment: Consider chamfers or rounded corners, especially on tables and islands near walkways.
  • Seams: Check whether seams fall in prominent or heavily used areas.
  • Cut-outs: Confirm hob, sink and socket openings before cutting.
  • Delivery route: Check that slabs fit through lifts, staircases and corridors.
  • Quoted scope: Check whether fabrication, delivery, installation and finishing are included.

For board cores and emission grades used in cabinets, see Boards commonly used for furniture。

Commissioning sintered-stone furniture

. See samples before arranging measurement and quotation.

01

Select materials at the showroom

Visit our Kwun Tong showroom to compare furniture and cabinet samples and choose materials and style.

02

Site measurement

Measure the proposed location and check beams, sockets and delivery routes.

03

Confirm quotation

Agree the dimensions, materials and fabrication methods before production.

04

Workshop production and installation

at Our workshop, delivered and installed on site, then checked for finish.

Sintered-stone furniture FAQs

Questions about the material, care and ordering.

What is sintered stone?

Sintered stone is a large slab made by pressing minerals such as quartz, feldspar and clay and firing at around 1,200°C or more. It is dense, has low water absorption and differs from both natural stone and resin-bound composites.

What are the advantages?

Low water absorption resists stains and mould. The mineral surface offers good heat, scratch and wear resistance, is easy to clean and comes in marble, concrete and plain finishes.

What are the limitations?

Hard but brittle edges can chip. Fabrication and transport require care and experienced installers. Seams remain visible, slab delivery depends on lift and stair dimensions, and prices are generally higher than solid surface.

How does it compare with engineered quartz?

Sintered stone is a fired mineral ceramic; engineered quartz uses quartz crystals and resin. Hardness is similar. Sintered stone generally offers better heat resistance but requires more specialised fabrication. Quartz is common in kitchen worktops. See the comparison table。

Can I put a hot pan directly on the surface?

Use a trivet. Even heat-resistant slabs and the underlying cabinet can be affected by sudden temperature changes.

How should I clean and care for it?

Use a soft cloth with water or neutral detergent and remove stains promptly. Avoid steel wool, abrasives, strong acids and alkalis. Use a chopping board, protect corners from impact and leave the surface unwaxed.

Where can it be used in a home?

Common applications include kitchen worktops and walls, TV walls, tables, cabinet fronts, entrance features and bathroom walls. Our range focuses on furniture and cabinets.

How should I choose thickness?

Thin slabs suit doors and finishes with backing. Worktops and tables need adequate thickness and support around cut-outs and loads. Confirm the specification with the fabricator.

Where can I see CraftInsignia’s sintered-stone furniture?

showroom occupies floors 2–4, 165 Hoi Bun Road, Kwun Tong. See panels, sintered-stone furniture and cabinet samples by appointment or walk in.

Where is the furniture made?

Furniture, cabinets and sintered-stone pieces are made at our workshop. Choose materials and styles at the showroom before measurement and quotation. For enquiries, WhatsApp or call +852 6036 4352、+852 6633 2245。

Kitchen cabinets with stone worktop

Interested in sintered-stone furniture?

Book a visit to floors 2–4 of the showroom at 165 Hoi Bun Road, Kwun Tong.

contact
WhatsApp