CraftInsignia workshop for bespoke furniture and cabinetry

Our workshop for bespoke furniture, cabinetry and sintered stone

Our workshop makes the pieces shown in these workshop and sintered-stone photographs.

One team for renovation and fitted furniture

Accurate workmanship brings a cabinet design to life.

CraftInsignia makes cabinets and sintered-stone furniture in its own workshop. In Hong Kong flats, beams, window ledges and air-conditioning units can make standard furniture awkward to fit. Measuring wardrobes, TV units, kitchen cabinets and platforms on site helps reclaim otherwise unusable corners.

Final joinery measurements follow tiling and plastering. Installation must finish before painting, cleaning and handover, so joinery is closely tied to the rest of the renovation. Our team coordinates measurements, drawings, production and installation. To see examples, visit our Kwun Tong showroom to compare materials and cabinet samples, or browse Renovation projects。

Item
Our workshop
Details
Furniture, cabinetry and sintered-stone ranges
Showroom
2/F–4/F, 165 Hoi Bun Road, Kwun Tong

Furniture made in our workshop

Made to measure around beams and air conditioners to minimise unused space.

Type Common location Design considerations
Wardrobe Bedroom Beams and air conditioners, hanging versus folded storage, door swing and clearance beside the bed
TV unit Living room Screen size, power and signal connections, equipment storage and ventilation
Kitchen cabinetry Kitchen Coordinate plumbing, extraction and depth with the cooker, sink and wall units
Raised platform Bedroom or multipurpose room Headroom, storage access, door thresholds and window ledges
Sintered-stone furniture Living and dining areas or kitchens Slab size, joints, edge finish and delivery access

How our workshop supports renovation

Plan bespoke furniture as part of the renovation programme.

01

Direct communication between design and production

Dimensions, compartment layouts and edge details go directly from the design team to our workshop.

02

Coordination with site progress

Joinery follows wet trades and precedes final painting and handover. The workshop and site teams can adjust together when the programme changes.

03

Clear responsibility

One team takes responsibility if a cabinet does not fit the site.

Our team manages design, planning and construction throughout. Read about our approach in About CraftInsignia。

The bespoke furniture process

The stages from selecting materials to installation.

01

Select materials and style

Visit our Showroom to compare colour, grain and edge details and choose finishes.

02

Site measurement

Measure the location and record beams, columns, ledges, air conditioners and sockets.

03

Drawings and quotation

Confirm dimensions, compartments, door swings and materials before pricing.

04

Check dimensions

Measure again after the walls, floor and ceiling are finished, before cutting material.

05

Workshop production

We manufacture the cabinets and furniture in our own workshop.

06

Installation and inspection

Deliver and fit the furniture, check edges, levels and operation, then hand over.

Why measure twice?

Plaster, tiles and flooring alter finished dimensions. Cut boards are difficult to change, so we check the finished walls, floor and ceiling before production. This is why joinery follows wet trades. See renovation sequence。

Boards commonly used for furniture

Ask about all three components of a board: core, surface and edging.

Board core Construction Characteristics Typical uses
Plywood Cross-laminated layers of thin wood veneer Good screw holding and load capacity, with resistance to humidity-related warping Load-bearing shelves, cabinets and areas near water such as kitchens
Particleboard Wood particles pressed with adhesive Flat and affordable. Exposed edges can swell when wet. Dry-area wardrobes, bookcases and TV units
Medium-density fibreboard (MDF) Compressed wood fibres Fine surface and easy machining, with lower screw holding and moisture resistance Shaped and lacquered door fronts
Moisture-resistant board Moisture-treated particleboard or fibreboard Improved resistance to humidity Kitchens, bathrooms and areas near water

General guidance for selection. The quotation specifies the actual materials.

E1, E0 and ENF formaldehyde grades

Adhesives in manufactured boards can release formaldehyde. E1, E0 and ENF classify emissions across plywood, particleboard and fibreboard. Under mainland standard GB/T 39600-2021, the lower the limit, the lower the emissions:

  • E1: At most 0.124 mg/m³
  • E0: At most 0.050 mg/m³
  • ENF: At most 0.025 mg/m³

Compare colour, grain and texture at our showroom in person.

Sintered stone: properties and precautions

Our workshop produces a range of sintered-stone furniture.

Natural minerals such as quartz, feldspar and clay are pressed under high pressure and sintered at about 1,200°C or above. The result is a dense surface used for worktops, wall finishes, cabinet fronts and furniture.

Properties

  • Low water absorption: Resists staining and mould in damp kitchens and bathrooms.
  • Heat resistance: Its resin-free mineral composition withstands heat better than resin-based composite stone.
  • Hard surface: Resists scratches and abrasion.
  • Stain resistance and cleaning: Oil and sauces seldom penetrate. Wipe with a damp cloth.
  • Variety of patterns: Finishes include marble and concrete effects.

Limitations

  • Edges can be brittle: Poor handling, drilling or edge finishing can cause chips.
  • Visible joints: Worktop seams cannot be made completely invisible.
  • Delivery constraints: Check lift and stair dimensions before ordering large slabs.
  • Specialist fabrication: Cutting and installation require experienced fitters and suitable tools.

For photographs of sintered-stone cabinets and furniture, see Sintered-stone furniture. For kitchen applications, see Kitchen renovation for details.

the bespoke furniture checklist

Check each item before signing off the drawings.

  • Dimensions: Height, width, depth and clearance around beams, ledges and air conditioners.
  • Internal layout: Plan shelves, drawers and hanging heights around the items to store.
  • Door operation: Choose hinged or sliding doors and check clearances to furniture and walkways.
  • Boards: Specify core, thickness, finish, edge treatment and formaldehyde grade.
  • Hardware: Choose hinges, runners and handles.
  • Electrical points: Allow for sockets, strip lighting and switches during wiring.
  • Delivery and installation: Check whether cabinets and slabs fit through lifts and corridors.
  • Quoted scope: Check delivery, installation and finishing are included.

If the joinery is part of a complete renovation, see how quotations are calculated。

Workshop and bespoke furniture FAQs

Questions about boards, sintered stone and production.

What does the workshop make?

We make furniture, cabinets, wardrobes, TV units, kitchen cabinets, platforms and sintered-stone pieces.

What difference does an in-house workshop make?

Joinery must follow the wet trades and fit the electrical and painting programme. One team handles dimensions, drawings, production and installation, making changes easier to coordinate and responsibility clear.

How does the bespoke furniture process work?

Select materials, measure the site, agree drawings and price, check dimensions, manufacture, deliver, install and inspect. Visit our Kwun Tong showroom to choose materials and designs before measurement and quotation.

When should fitted furniture be measured?

We take initial dimensions during design. Before cutting boards, we remeasure after walls, floor and ceiling are finished because plastering and flooring change the fit.

What is sintered stone made from?

Quartz, feldspar, clay and other minerals are pressed and fired at around 1,200°C or higher. The dense material has low water absorption and a hard, heat- and stain-resistant surface suitable for worktops, walls, cabinet fronts and furniture.

What should I consider with sintered-stone furniture?

Edges can chip during handling, drilling or finishing. Worktop joints remain visible. Lift and stair dimensions limit slab sizes, so experienced fabricators and fitters are important.

Which boards are common in fitted furniture?

Plywood provides screw holding and strength for shelves or areas near water. Particleboard is flat and widely used for cabinets. MDF takes shaped and lacquered finishes well but is less moisture resistant. Ask about core, surface, edges and thickness.

What do E0 and E1 mean?

They are formaldehyde emission grades. Under GB/T 39600-2021, the maximum is 0.124 mg/m³ for E1, 0.050 for E0 and 0.025 for ENF. Lower figures indicate lower emissions.

Where can I view furniture and sintered-stone samples?

showroom occupies floors 2–4, 165 Hoi Bun Road, Kwun Tong. See panels, sintered-stone furniture and cabinet samples by appointment or walk in.

Bespoke joinery and home storage

Interested in bespoke furniture?

Ask for a measurement and quotation or compare board and cabinet samples in our Kwun Tong showroom.

contact
WhatsApp